Rancang Bangun Alat Pendeteksi Tingkat Stress Pada Manusia Berbasis Arduino Uno
DOI:
https://doi.org/10.33387/protk.v8i1.2240Keywords:
Heart Rate, Body Temperature, Skin Moisture, Stress, Arduino Uno, Pulse Sensor, GSR Sensor, Temperature Sensor DS18B20, LCD 20x4Abstract
Stress can be sourced from a variety of things, many negative impacts without us realizing that stress is caused by health.Therefore, a tool capable of being used to automatically measure stress levels in humans is required as a tool to monitor health. This human stress level detection tool uses a tool used to measure the level of human tension condition with three parameters, namely measuring heart rate using pulse sensor, body temperature using temperature sensor DS18B20 and skin moisture using galvanic skin response (gsr) sensor then the data will be sent, processed and processed using Arduino Uno R3 Microcontroller to process information to determine the level of stress condition of a person classified into 4 conditions namely relax , calm, anxious, and tense. Data retrieval is done for 1 minute with the measurement data results displayed on the LCD monitor scree
References
Suryani, Tatik dan Widyantoro. 2011. Analisis Faktor-Faktor Yang Mempengaruhi Tingkat Stres Kerja Pada Tenaga Edukatif Tetap Perguruan Tinggi Swasta.
Noer Muhammad Hedi Pratama. 2018. Rancang Bangun Deteksi Stress Pada Sistem Pemantau Kesehatan Manusia Berbasis Arduino Nano. Jurusan Teknik Elektro, Fakultas Teknik, Universitas Lampung.
Kresna Hadya, Pradhipta. 2014. Rancang Bangun Alat Pengukur Tingkat Stres Menggunakan Metode Fuzzy Logic. Program Studi S1 Sistem Komputer, Jurusan Sistem Komputer, Sekolah Tinggi Manajemen Informatika & Teknik Komputer Surabaya.
Utomo, Satryo Budi dan Bambang Supeno. 2016. Rancang Bangun Alat Ukur Kondisi Kesehatan Pada Pendaki Gunung Berbasis Fuzzy Logic. Jember : Fakultas Teknik Universitas Jember
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- The copyright of the accepted for publication articles shall be assigned to Protek : Jurnal Ilmiah Teknik Elektro as the publisher of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
- Protek : Jurnal Ilmiah Teknik Elektro maintain the publishing rights of the published articles.
- Authors are permitted to republish or disseminate published articles by sharing the link/DOI of the article at Protek : Jurnal Ilmiah Teknik Elektro. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from Protek : Jurnal Ilmiah Teknik Elektro with an acknowledgment of initial publication to this journal.
Protek : Jurnal Ilmiah Teknik Elektro by Department of Electrical Engineering, Faculty of Engineering, Universitas Khairun
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.