Implementation of Hand Tractor Control Device Remotely Using Flysky Fs-I6 Remote Control
DOI:
https://doi.org/10.33387/protk.v11i1.6741Keywords:
Hand Tractor, Flysky Fs-I6 Transmitter, Servo Motor, Power Window, Solar Panel, Pzem Sensor.Abstract
The use of hand tractors for agricultural land processing still causes several problems such as work fatigue and ergonomic problems for the operator. From these problems the author has the idea to build a tool that can be attached to a hand tractor so that the hand tractor can be controlled using a remote control. The purpose of this final project is to make a remote hand tractor controller, find out the performance of the tool, and find out how the tool works. The method used consists of system design, tool making, and testing. In the hardware part, the main control uses an ATmega328 microcontroller on an Arduino nano board, flysky fs-i6 remote control as a remote command sender input, servo motor as the output of the gas mechanical drive on the tractor disel, motor driver as an output amplifier to drive the DC power window motor that pulls the tractor clutch, solar panel for battery charging, pzem sensor to measure the power coming out of the solar panel. To design the software schematic used is fritzing software, and for program creation using Arduino IDE software. Based on the test results of the tool installed on the hand tractor, it shows that this tool has been successful and the tractor can be controlled remotely. The remote tractor controller works with a power supply voltage in the range of 12 volts DC. The receiver on the tool works with a voltage of 5.0 volts DC with a transmission range that can cover a distance of up to 1000 m. The servo motor works at a voltage of 5.0 volts DC. The mechanical clutch is capable of being pulled by a DC power window motor that works with a voltage of 12 volts DC.Downloads
References
I. Kholili, “The Analisis Manajemen Keuangan Petani dan Perkembangan Ekonomi Keluarga,†J. Ilm. Bisnis dan Ekon. Asia, vol. 13, no. 1, pp. 7–14, 2019, doi: 10.32812/jibeka.v13i1.95.
Fattahaya, “Modernisasi Pertanian Pada Petani Padi Di Kecamatan Bandar Baru Kabupaten Pidie Jaya,†J. Ilm. Mhs. FISIP Unsyiah, vol. 2, pp. 865–906, 2017.
A. Wicaksana and T. Rachman, 済無No Title No Title No Title, vol. 3, no. 1. 2018. [Online]. Available: https://medium.com/@arifwicaksanaa/pengertian-use-case-a7e576e1b6bf
A. Finawan, Muhaimin, Eliyani, and Hanafi, “Rancang Bangun Prototipe Pengendali Traktor Tangan Secara Jarak Jauh berbasis Mikrokontroler,†Semin. Nas. Politek. Negeri Lhokseumawe, vol. 3, no. 1, pp. A42–A45, 2019.
Dzulhidayat, No Title×”×›×™ קשה לר×ות ×ת מה שב×מת ×œ× ×’×“ ×”×¢×™× ×™×, no. 8.5.2017. 2022.
M. Kuddus, No 主観的å¥åº·æ„Ÿã‚’ä¸å¿ƒã¨ã—ãŸåœ¨å®…高齢者ã«ãŠã‘ã‚‹ å¥åº·é–¢é€£æŒ‡æ¨™ã«é–¢ã™ã‚‹å…±åˆ†æ•£æ§‹é€ 分æžTitle. 2019.
R. F. Rizky et al., “Sistem Smart Door Lock Menggunakan Voice Recognition Berbasis Arduino,†vol. 4, no. 2, pp. 239–244, 2023.
N. Nithyavathy, S. Arun Kumar, D. Rahul, B. Satheesh Kumar, E. R. Shanthini, and C. Naveen, “Detection of fire prone environment using Thermal Sensing Drone,†IOP Conf. Ser. Mater. Sci. Eng., vol. 1055, no. 1, p. 012006, 2021, doi: 10.1088/1757-899x/1055/1/012006.
S. P. Listrik et al., “Analisis Potensi Pembangkit Listrik Tenaga Surya Di Indonesia,†pp. 43–52.
D. Dzulfikar and W. Broto, “Optimalisasi Pemanfaatan Energi Listrik Tenaga Surya Skala Rumah Tangga,†vol. V, pp. SNF2016-ERE-73-SNF2016-ERE-76, 2016, doi: 10.21009/0305020614.
D. A. Ratnasari, B. Suprianto, and F. Baskoro, “Monitoring Daya Listrik Pada Panel Surya Berbasis Internet of Things (IoT) Menggunakan Aplikasi Telegram,†Indones. J. Eng. Technol., vol. 5, no. 1, pp. 1–10, 2022, [Online]. Available: https://journal.unesa.ac.id/index.php/inajet/article/view/19101%0Ahttps://journal.unesa.ac.id/index.php/inajet/article/download/19101/8404
B. Wulandari, “Respon Sistem Respon Sistem,†pp. 1–29, 2017, [Online]. Available: https://besmart.uny.ac.id/v2/pluginfile.php/97858/mod_resource/content/1/Respon sistem orde 1.pdf
B. Robert and E. B. Brown, “No 主観的å¥åº·æ„Ÿã‚’ä¸å¿ƒã¨ã—ãŸåœ¨å®…高齢者ã«ãŠã‘ã‚‹ å¥åº·é–¢é€£æŒ‡æ¨™ã«é–¢ã™ã‚‹å…±åˆ†æ•£æ§‹é€ 分æžTitle,†no. 1, pp. 1–14, 2004.
I. Dinata and W. Sunanda, “Implementasi Wireless Sensor Network Untukmonitoring Parameterenergi Listrik Sebagaipeningkatan Layananbagi Penyedia Energilistrik,†Nas. Tek. Elektro, no. 1, pp. 83–88, 2015.
R. Sulistyowat and D. D. Febriantoro, “Perancangan Prototype Sistem Kontrol Dan Monitoring Pembatas Daya Listrik Berbasis Mikrokontroler,†J. Iptek, vol. 16, pp. 10–21, 2015, [Online]. Available: http://jurnal.itats.ac.id/wp-content/uploads/2013/06/4.-RINY-FINAL-hal-24-32.pdf
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Copyright & License
Copyright, licensing, and reuse terms for articles published in Protek: Jurnal Ilmiah Teknik Elektro
1. Copyright
Authors who publish in Protek: Jurnal Ilmiah Teknik Elektro retain the copyright of their work. Copyright of each article is vested exclusively in its authors.
2. License
Articles in Protek are published under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0). Anyone may share and adapt the work under the following terms:
3. Author's Warranties
By submitting a manuscript, the author warrants that the article:
- is original and has not been published before;
- contains no unlawful statements;
- does not infringe the rights of others;
- is subject to copyright vested exclusively in the author(s); and
- includes any necessary permissions to quote material from other sources.
4. User Rights
Under CC BY-NC-SA 4.0, users may copy, distribute, display, and perform the work for non-commercial purposes only. When distributing the work, users must give proper credit to the authors and to Protek as the original place of publication.
7. Royalties
The parties agree that no royalties or other fees are paid to the authors for publication. To the extent legally permissible, authors waive any claim to royalties for the publication of their article.
8. Miscellaneous
- Protek publishes the article in electronic form and makes it freely available to the public, without charge to readers.
- The editors may modify the article to conform to the journal's style, including punctuation, spelling, capitalization, referencing, and usage.
Questions about copyright or licensing can be sent to protek@unkhair.ac.id. See also the Open Access Policy and Publication Ethics.

