Design of Automatic Gate Rolling Door Control System Using Rain Drop Sensor
DOI:
https://doi.org/10.33387/protk.v10i3.4895Keywords:
Arduino Uno, Raindrop Sensor, Infrared Sensor, response time, delayAbstract
Rolling doors used by small-scale industrial companies are still operated manually with conventional up, down, and stop button panels. This is the cause of the problem of inefficient transportation mobility that operates and causes product losses due to rainwater splashing that enters the warehouse. Therefore, this study aims to implement an automatic rolling door with a DC motor drive assisted by a raindrop sensor. The research method used is a literature study approach: identifying problems, determining the focus and research objectives, designing and implementing prototype solutions, testing, discussing, and drawing conclusions. Based on system testing, it was found that the response time for reading the rain sensor took 1.19 seconds, and the response time for reading the rain sensor to detect light again was 0.92 seconds. The delay time for the DC motor to rotate to close the gate when it receives a sensor signal in rainy conditions is 1.34 seconds, and the delay time for opening the gate when it receives a sensor signal that is bright again or the sensor is dry is 0.98 seconds. Based on the results of system testing, it was found that the delay time buzzer sounded as a warning sign if someone crossed it for 0.86 seconds. Overall, the test results show that the system is running well according to the functions, and system algorithms are active at the same time.Downloads
References
A. Putra and D. H. R. Saputra, “Otomasi Rolling Door Menggunakan Android dan QR Code,†Jurnal Simetri Rekayasa, vol. 1, no. 2, pp. 36–38, 2019.
A. P. Zanofa, R. Arrahman, M. Bakri, and A. Budiman, “Pintu Gerbang Otomatis Berbasis Mikrokontroler Arduino UNO R3,†Jurnal Teknik Dan Sistem Komputer, vol. 1, no. 1, pp. 22–27, 2020.
D. Ngani, K. J. Tute, and B. Y. Bhae, “RANCANG BANGUN AKSES KONTROL PINTU RUMAH DENGAN MENGGUNAKAN MIKROKONTROLER ARDUINO UNO,†Simtek: jurnal sistem informasi dan teknik komputer, vol. 8, no. 1, pp. 154–158, 2023.
D. Siswanto, “Jemuran pakaian otomatis menggunakan sensor hujan dan sensor ldr berbasis Arduino Uno,†e-NARODROID, vol. 1, no. 2, 2015.
F. Sihombing and N. J. Siburian, “Perancangan Gerbang Otomatis Menggunakan Frekuensi Berbasis Arduino,†Jurnal ELPOTECS, vol. 4, no. 2, pp. 10–21, 2021.
T. M. Banjarnahor, S. Sumarno, B. E. Damanik, I. Gunawan, and I. O. Kirana, “Jemuran Pintar Dengan Sensor Ldr, Sensor Hujan, Sensor Suhu Dan Sensor KecepatanAngin Berbasis Arduino,†Building of Informatics, Technology and Science (BITS), vol. 1, no. 2, pp. 75–81, 2019.
A. Hasibuan, R. Rosdiana, and D. S. Tambunan, “Design and Development of An Automatic Door Gate Based on Internet of Things Using Arduino Uno,†Bulletin of Computer Science and Electrical Engineering, vol. 2, no. 1, pp. 17–27, 2021.
M. Berahim, S. N. A. A. Hei, E. N. Nazri, and N. F. M. Rafik, “Automatic Clothesline Retrieval Prototype with Humidity Alert System to Aid Clothesline Drawbacks for Reducing Laundry Worries,†Multidisciplinary Applied Research and Innovation, vol. 2, no. 1, pp. 401–410, 2021.
L. M. Silalahi, D. Jatikusumo, S. Budiyanto, F. A. Silaban, I. U. V. Simanjuntak, and A. D. Rochendi, “Internet of things implementation and analysis of fuzzy Tsukamoto in prototype irrigation of rice,†Int. J. Electr. Comput. Eng, vol. 12, no. 6, pp. 6022–6033, 2022.
J. Pakaian, M. Sensor, H. Berbasis, M. Dwi Payana, W. Mulia, and M. Iqbal, “Perancangan Prototipe Sistem Tutup Kanopi Otomatis Pada,†Journal of Informatics and Computer Science, vol. 5, no. 1, pp. 1–9, 2019.
Azmi Kurdianto and Wiendartun, “Rancang Bangun Pengisi Toren Air Otomatis Menggunakan Sensor Inframerah Berbasis Arduino Uno,†Prosiding Seminar Nasional Fisika, vol. 0, pp. 317–322, 2019.
S. Muliarni and I. Husnaini, “Aplikasi Pengontrolan Lampu Dan Motor DC Berbasis Arduino,†JTEV (Jurnal Teknik Elektro dan …, vol. 06, no. 02, pp. 285–291, 2020.
K. Fatmawati, E. Sabna, and Y. Irawan, “Rancang Bangun Tempat Sampah Pintar Menggunakan Sensor Jarak Berbasis Mikrokontroler Arduino,†Riau Journal Of Computer Science, vol. 6, no. 2, pp. 124–134, 2020.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Copyright & License
Copyright, licensing, and reuse terms for articles published in Protek: Jurnal Ilmiah Teknik Elektro
1. Copyright
Authors who publish in Protek: Jurnal Ilmiah Teknik Elektro retain the copyright of their work. Copyright of each article is vested exclusively in its authors.
2. License
Articles in Protek are published under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0). Anyone may share and adapt the work under the following terms:
3. Author's Warranties
By submitting a manuscript, the author warrants that the article:
- is original and has not been published before;
- contains no unlawful statements;
- does not infringe the rights of others;
- is subject to copyright vested exclusively in the author(s); and
- includes any necessary permissions to quote material from other sources.
4. User Rights
Under CC BY-NC-SA 4.0, users may copy, distribute, display, and perform the work for non-commercial purposes only. When distributing the work, users must give proper credit to the authors and to Protek as the original place of publication.
7. Royalties
The parties agree that no royalties or other fees are paid to the authors for publication. To the extent legally permissible, authors waive any claim to royalties for the publication of their article.
8. Miscellaneous
- Protek publishes the article in electronic form and makes it freely available to the public, without charge to readers.
- The editors may modify the article to conform to the journal's style, including punctuation, spelling, capitalization, referencing, and usage.
Questions about copyright or licensing can be sent to protek@unkhair.ac.id. See also the Open Access Policy and Publication Ethics.

