Ideal Baby Height And Weight Monitoring Design
DOI:
https://doi.org/10.33387/protk.v12i3.9705Keywords:
Infant growth, infant development, nutritional status, ultrasonic sensor, load cell, ESP32, automatic monitoring, real-time, Blynk.Abstract
Growth and development of infants are crucial aspects that need to be regularly monitored, with height and weight serving as key indicators of nutritional status. This study aims to design and develop a technology-based system to automatically monitor the height and weight of infants using ultrasonic sensors and load cells. The system is designed to provide accurate, practical, and continuous real-time measurements, integrating technologies such as ESP32, LCD, and Blynk application. Test results demonstrate that the system achieves high accuracy with an error percentage below 1%, along with optimal performance of the ultrasonic sensor (distance up to 80 cm) and load cell (weight up to 10 kg). Among the 6 samples tested, 2 infants were categorized as undernourished, 4 as normal. This system is expected to simplify the monitoring of infant nutritional status, support early detection of health issues, and contribute to improved growth quality
Downloads
References
Wulandari, Luh Gede Putri, Hubungan Indeks Massa Tubuh Ibu Dengan Berat Badan Lahir Bayi Di Rumah Sakit Umum Pusat Sanglah Denpasar, Denpasar,
M. D. Syahputra, U. Fatimah, S. Sitorus, and D. Suherdi, “Rancang Bangun Palang Otomatis Zebra Cross Menggunakan Metode Pulse Width Modulation Berbasis Arduino,” vol. 1, no. 0, pp. 50–56, 2022.
Harismayanti, Retni, A., & Dunggio, S. N. (2023). Analisis perbedaan berat badan dan panjang badan pada bayi usia 6-7 bulan yang diberikan ASI eksklusif di wilayah kerja Puskesmas Kota Barat. Jambura Journal of Health Science and Research, 5(1), 152.
Agus Wibowo Lawrence Adi Supriyono, Analisis Pemakaian Sensor Loadcell Dalam Perhitungan Berat Benda Padat Dan Cair Berbasis Microcontroller, Sekolah Tinggi Manajemen Informatika dan Komputer, Semarang. 2022.
I. Gunawan and H. Ahmadi, “Sistem Monitoring Dan Pengkabutan Otomatis Berbasis Internet Of Things (IoT) Pada Budidaya Jamur Tiram Menggunakan NodeMCU dan Blynk,” Infotek J. Inform. dan Teknol., vol. 4, no. 1, pp. 79–86, 2021, doi: 10.29408/jit.v4i1.2997.
M. Iman Wahyudi and Rifki Abdul Aziz, “Keran Air Wudhu Otomatis Menggunakan Sensor Infrared Sebagai Upaya Meminimalisasi Pemborosan Air,” J. Appl. Comput. Sci. Technol., vol. 3, no. 1, pp. 151–156, 2022, doi: 10.52158/jacost.v3i1.296.
O'Connor, Sean, and Jonathan McCullagh. Design and Application of Load Cells. Journal of Instrumentation, Measurement, and Analysis, 2020.
Carrara, P., et al. Innovative Load Cell Designs for Precision Weight Measurement in Industrial Applications. IEEE Transactions on Industrial Electronics, 2020.
He, Zhenyu, et al. Recent Advances in Load Cell Technologies: Design and Application in Dynamic Force Measurement. IEEE Sensors Journal, 2023.
Wang, Z., Zeng, Y., & Liu, X. (2021). Design of a Smart Baby Monitoring System Based on IoT. IEEE Access, 9, 164738-164747.
Das, R., & Ali, S. M. (2019). Automatic Baby Monitoring System: A Review. International Journal of Advanced Research in Computer and Communication Engineering, 8(3), 45-50.
Chowdhury, T., Rahman, M. M., & Rahman, M. (2020). IoT Based Health Monitoring & Automated Weight Measurement System for Newborn Babies. 2020 IEEE Region 10 Symposium (TENSYMP), 1238-1243.
P. L. E. Aritonang, E. C. Bayu, S. D. K, and J. Prasetyo, “Rancang Bangun Alat Pemilah Sampah Cerdas Otomatis,” hal. 375–381, 2019.
WHO, Reducing Stunting In Children: Equity considerations for achieving the Global Nutrition Targets 2025. Word Health Organization., 2018.
E. A. S. Tri Hamdani Agung Cahyono, "Alat Ukur Berat Badan, Tinggi Badan dan Suhu Badan di Posyandu Berbasis Android," ELINVO (Electonics, Informatics, and Vocational Education), pp. 31-38, 2018.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Copyright & License
Copyright, licensing, and reuse terms for articles published in Protek: Jurnal Ilmiah Teknik Elektro
1. Copyright
Authors who publish in Protek: Jurnal Ilmiah Teknik Elektro retain the copyright of their work. Copyright of each article is vested exclusively in its authors.
2. License
Articles in Protek are published under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0). Anyone may share and adapt the work under the following terms:
3. Author's Warranties
By submitting a manuscript, the author warrants that the article:
- is original and has not been published before;
- contains no unlawful statements;
- does not infringe the rights of others;
- is subject to copyright vested exclusively in the author(s); and
- includes any necessary permissions to quote material from other sources.
4. User Rights
Under CC BY-NC-SA 4.0, users may copy, distribute, display, and perform the work for non-commercial purposes only. When distributing the work, users must give proper credit to the authors and to Protek as the original place of publication.
7. Royalties
The parties agree that no royalties or other fees are paid to the authors for publication. To the extent legally permissible, authors waive any claim to royalties for the publication of their article.
8. Miscellaneous
- Protek publishes the article in electronic form and makes it freely available to the public, without charge to readers.
- The editors may modify the article to conform to the journal's style, including punctuation, spelling, capitalization, referencing, and usage.
Questions about copyright or licensing can be sent to protek@unkhair.ac.id. See also the Open Access Policy and Publication Ethics.

