Overview of Bidirectional DC DC Converter for Energy Storage System in Renewable Energy Power Generation

Penulis

  • Tyas Kartika Sari UNIVERSITAS TRISAKTI https://orcid.org/0000-0003-0428-2255
  • Dianing Novita Nurmala Putri UNIVERSITAS TRISAKTI
  • Chairul Gagarin Irianto UNIVERSITAS TRISAKTI
  • Maulasukma Widjaja UNIVERSITAS TRISAKTI

DOI:

https://doi.org/10.33387/protk.v13i1.9129

Kata Kunci:

Renewable energy sources, Power generation, Intermittent, Energy storage systems, Bidirectional DC-DC converter.

Abstrak

The integration of renewable energy sources (RES), such as wind and solar energy, has become increasingly growth in power generation systems. However, the intermittent and variable nature of these sources poses challenges, especially in maintaining the stability of the power grid. The address this chalange, energy storage systems (ESS) have emerged as a critical component in renewable energy power generation, enhancing grid stability, improving systems resilience and improving the reliability of the electrical grid. Bidirectional DC-DC converters play a crucial role in integrating RES with the energy storage system and the grid. In this study, a comparative is conducted through  literature review, design and calculation of buck-boost bidirectional DC-DC converter for battery charging application in renewable energy power generation. This research paper provides an overview of the various bidirectional DC-DC converter topologies which are suitable for energy storage system applications in renewable energy power generation. The paper dicusses the topologies of bidirectional DC-DC converters, advantages and limitations of different converter topologis including isolated and non-isolated configurations. The result indicate that isolated topologies offer better galvanic isolation and flexibility in voltage conversion, whereas non-isolated converters provide higher efficiency and simpler design, making them more suitable for compact ESS application

Referensi

Ke Jin, Mengxiong Yang, Xinbo Ruan, and Min Xu, “Three-Level Bidirectional Converter for Fuel-Cell/Battery Hybrid Power System,” IEEE Transactions on Industrial Electronics, vol. 57, no. 6, pp. 1976–1986, Jun. 2010, doi: 10.1109/TIE.2009.2031197.

B. Mangu, S. Akshatha, D. Suryanarayana, and B. G. Fernandes, “Grid-Connected PV-Wind-Battery-Based Multi-Input Transformer-Coupled Bidirectional DC-DC Converter for Household Applications,” IEEE J Emerg Sel Top Power Electron, vol. 4, no. 3, pp. 1086–1095, Sep. 2016, doi: 10.1109/JESTPE.2016.2544789.

J. Wang, B. Wang, L. Zhang, J. Wang, N. I. Shchurov, and B. V. Malozyomov, “Review of bidirectional DC–DC converter topologies for hybrid energy storage system of new energy vehicles,” Green Energy and Intelligent Transportation, vol. 1, no. 2, p. 100010, Sep. 2022, doi: 10.1016/j.geits.2022.100010.

N. P. Besekar, “DC-DC Converters Topology,” Journal of Image Processing and Intelligent Remote Sensing, no. 32, pp. 11–21, Feb. 2023, doi: 10.55529/jipirs.32.11.21.

A. A. Hussein, N. Kutkut, Z. J. Shen, and I. Batarseh, “Distributed Battery Micro-Storage Systems Design and Operation in a Deregulated Electricity Market,” IEEE Trans Sustain Energy, vol. 3, no. 3, pp. 545–556, Jul. 2012, doi: 10.1109/TSTE.2012.2191806.

T. K. Mahatkar and M. R. Bachawad, “An overview of energy storage devices for distribution network,” in 2017 International Conference on Computation of Power, Energy Information and Commuincation (ICCPEIC), IEEE, Mar. 2017, pp. 536–541. doi: 10.1109/ICCPEIC.2017.8290424.

S. Adarsh and H. Nagendrappa, “Multiport Converters to Integrate Multiple Sources and Loads - A Review of Topologies,” in 2018 4th International Conference for Convergence in Technology (I2CT), IEEE, Oct. 2018, pp. 1–7. doi: 10.1109/I2CT42659.2018.9058269.

A. S. Obi, S.-H. Lee, H.-S. Jung, and J.-J. Jung, “A Center-Tapped Transformer Based Multifunctional Single-Phase Converter with Wide DC-Bus Control,” Sensors, vol. 23, no. 4, p. 2227, Feb. 2023, doi: 10.3390/s23042227.

Q. Yao, Y. Zeng, and Q. Jia, “A Novel Non-Isolated Cubic DC-DC Converter with High Voltage Gain for Renewable Energy Power Generation System,” Energy Engineering, vol. 121, no. 1, pp. 221–241, 2024, doi: 10.32604/ee.2023.041028.

N. P. Besekar, “DC-DC Converters Topology,” Journal of Image Processing and Intelligent Remote Sensing, no. 32, pp. 11–21, Feb. 2023, doi: 10.55529/jipirs.32.11.21.

M. H. . Rashid, Power electronics : devices, circuits, and applications. Pearson, 2014.

K. K. Pandey, M. Kumar, A. Kumari, and J. Kumar, “Bidirectional DC-DC Buck-Boost Converter for Battery Energy Storage System and PV Panel,” 2021, pp. 681–693. doi: 10.1007/978-981-15-9829-6_54.

Md. M. Hasan, S. Jaman, T. Geury, and O. Hegazy, “Performance Assessment of a Grid-Connected Two-Stage Bidirectional Converter for a Combined PV–Battery Energy Storage System,” Energies (Basel), vol. 16, no. 11, p. 4486, Jun. 2023, doi: 10.3390/en16114486.

G. I. Hasyim, S. Wijanarko, J. Furqani, A. Rizqiawan, and P. A. Dahono, “A current control method for bidirectional multiphase DC-DC boost-buck converter,” International Journal of Electrical and Computer Engineering (IJECE), vol. 12, no. 3, p. 2363, Jun. 2022, doi: 10.11591/ijece.v12i3.pp2363-2377.

S. Coelho et al., “A Unified Power Converter for Solar PV and Energy Storage in dc Microgrids,” Batteries, vol. 8, no. 10, p. 143, Sep. 2022, doi: 10.3390/batteries8100143.

Unduhan

Diterbitkan

2026-01-31

Cara Mengutip

Sari, T. K., Nurmala Putri, D. N., Irianto, C. G., & Widjaja, M. (2026). Overview of Bidirectional DC DC Converter for Energy Storage System in Renewable Energy Power Generation. PROtek : Jurnal Ilmiah Teknik Elektro, 13(1), 19–26. https://doi.org/10.33387/protk.v13i1.9129

Terbitan

Vol 13 No 1 (2026): Protek : Jurnal Ilmiah Teknik Elektro

Bagian

PROtek : Jurnal Ilmiah Teknik Elektro

Lisensi

 

    1. Penulis menyimpan hak cipta dan memberikan jurnal hak penerbitan pertama naskah secara simultan dengan lisensi di bawah Creative Commons Attribution License yang mengizinkan orang lain untuk berbagi pekerjaan dengan sebuah pernyataan kepenulisan pekerjaan dan penerbitan awal di jurnal ini.

    1. Penulis bisa memasukkan ke dalam penyusunan kontraktual tambahan terpisah untuk distribusi non ekslusif versi kaya terbitan jurnal (contoh: mempostingnya ke repositori institusional atau menerbitkannya dalam sebuah buku), dengan pengakuan penerbitan awalnya di jurnal ini.

    1. Penulis diizinkan dan didorong untuk mem-posting karya mereka online (contoh: di repositori institusional atau di website mereka) sebelum dan selama proses penyerahan, karena dapat mengarahkan ke pertukaran produktif, seperti halnya sitiran yang lebih awal dan lebih hebat dari karya yang diterbitkan. (Lihat Efek Akses Terbuka).