IMPLEMENTATION OF THE COMPLEX PROPORTIONAL ASSESSMENT METHOD IN DETERMINING THE PLACE OF INDUSTRIAL WORK PRACTICE

Suwinda Aulansari, Muhammad Dedi Irawan

Abstract


Industrial Work Practices are a form of directly applying the knowledge gained in the classroom to the industrial world or the world of work. However, in its implementation, problems exist, such as workloads that must be by majors and conditions. This research uses the COPRAS method to build a decision support system to determine the place of industrial work practice at Prama Artha Private Vocational School. This method focuses on resolving each alternative's relative weight and utility and performing complex calculations proportionally. This study used 10 alternative data for internship places as samples and five criteria: student expertise, company division, distance, number of students, and type of company. The results of this study are that the PLN UP3 Pematang Siantar alternative is ranked first with a final calculation result of 100, the USI Pematang Siantar alternative is ranked second with a final calculation result of 96.29 and continued with the Tunas Bangsa STIKOM alternative with a final calculation value of 93.01. This COPRAS ranking system is based on the weights and values given to each criterion so that objectivity and accuracy are guaranteed in determining the place of internship based on the needs and abilities of students. Based on the results of black box testing of the system, it can be concluded that the system as a whole can run according to functionality and is ready for use

Full Text:

PDF

References


N. Yona Sidratul Munti and D. Asril Syaifuddin, “Analisa Dampak Perkembangan Teknologi Informasi Dan Komunikasi Dalam Bidang Pendidikan,” J. Pendidik. Tambusai, vol. 4, no. 2, pp. 1799–1805, 2020.

B. T. Budirahayu, M. Siti, and M. Fahrul, “Potential Exploitation of Female Vocational High School Students in Internship Programs By Tuti Budirahayu, 1 Siti Mas’udah, 2 and Fahrul Muzaqqi 3,” vol. 20, no. 9, 2021.

R. Arief, A. Rachman, E. C. Muliawati, I. Teknologi, and A. Tama, “Decision Support System for Selecting Vocational High Schools in Surabaya Using the F-Ahp Method (Fuzzy Analytical Hierarchy Process),” Proc. Natl. Semin. Appl. Sci. Technol., pp. 1–5, 2022.

M. Ridwan, “Pembangunan Sumber Daya Manusia Pada Sekolah Kejuruan Di Indonesia: Tantangan Dan Peluang Di Era Revolusi Industri 4.0,” Moderasi J. Stud. Ilmu Pengetah. Sos., vol. 2, no. 1, pp. 1–10, 2021, doi: 10.24239/moderasi.vol2.iss1.35.

Wawan Patriansyah, Nurbaya Harianja, and Rina Tiur Lona, “Implementasi Sistem Informasi Manajemen Dalam Mendukung Pelayanan Administrasi Pada Sekolah Menengah Kejuruan Negeri 1 Kota Padangsidimpuan,” J. Ris. Manaj. Dan Ekon., vol. 1, no. 1, pp. 59–75, 2023, doi: 10.54066/jrime-itb.v1i1.80.

M. S. Hartayani and G. Sandiasa, “Peranan Teknologi Informasi Dalam Meningkatkan Efektivitas Pelayanan Tata Usaha Pada Smk Negeri 1 Sukasada,” Locus, vol. 14, no. 2, pp. 39–54, 2022, doi: 10.37637/locus.v14i2.1020.

Belly, “Evaluasi Praktek Kerja Industri Dalam Rangka Meningkatkan Penyerapan Tenaga Kerja di Dunia Usaha dan Dunia Industri di SMK Negeri 2 Lubuklinggau,” J. Manajer Pendidik., vol. 17, no. 1, pp. 80–88, 2023.

B. Stijn, B. Neyt, T. Siedler, I. Tobback, and D. Verhaest, “Economics of Education Review Student internships and employment opportunities after graduation : A field experiment,” Econ. Educ. Rev., vol. 83, p. 102141, 2021, doi: 10.1016/j.econedurev.2021.102141.

I. Farida and Asri Wahyuni, “Penerapan Metode Simple Additive Weighting (SAW) Dalam Sistem Penunjang Keputusan Untuk Menentukan Tempat Prakerin,” Tematik, vol. 9, no. 1, pp. 85–93, 2022, doi: 10.38204/tematik.v9i1.922.

E. P. Sarabi, “Developing a decision support system for logistics service provider selection employing fuzzy MULTIMOORA & BWM in mining equipment manufacturing,” Appl. Soft Comput., vol. 98, 2021, doi: 10.1016/j.asoc.2020.106849.

M. D. Irawan, M. R. Fasya, U. Islam, N. Sumatera, and S. Utara, “Sistem Pendukung Keputusan dengan Aplikasi AHP-TOPSIS Combination for Selection of the Best Lecturers Based on the SINTA Metric,” pp. 1–12, 2024.

Y. Yun, “Human–computer interaction-based Decision Support System with Applications in Data Mining,” Futur. Gener. Comput. Syst., vol. 114, pp. 285–289, 2021, doi: 10.1016/j.future.2020.07.048.

M. D. Irawan, “MUALIM-SAW: Seleksi Mualim pada Madrasah Diniyah Awaliyah Berbasis Keputusan Menggunakan Metode SAW,” J. Penelit. Medan Agama, vol. 13, no. 1, p. 1, 2022, doi: 10.58836/jpma.v13i1.11924.

A. M. Harahap and A. B. Nasution, “MENGGUNAKAN LIMA ALGORITMA PADA PROGRAM STUDI SISTEM INFORMASI UIN SUMATERA UTARA MEDAN,” pp. 38–43.

D. Beriro et al., “A decision support system to assess the feasibility of onshore renewable energy infrastructure,” Renew. Sustain. Energy Rev., vol. 168, no. November 2021, p. 112771, 2022, doi: 10.1016/j.rser.2022.112771.

P. Thakur, “The Group Decision-Making Using Pythagorean Fuzzy Entropy and the Complex Proportional Assessment,” Sensors, vol. 22, no. 13, 2022, doi: 10.3390/s22134879.

S. B. Patil, “Complex Proportional Assessment (COPRAS) based Multiple-Criteria Decision Making (MCDM) paradigm for hard turning process parameters,” Mater. Today Proc., vol. 59, pp. 835–840, 2022, doi: 10.1016/j.matpr.2022.01.142.

D. O. Sihombing, F. Yutika, and A. Cahyadi, “Implementasi Metode COPRAS Dengan Pembobotan ROC Dalam Menentukan Food Delivery Application Terbaik,” vol. 5, no. 2, pp. 657–665, 2024, doi: 10.47065/josh.v5i2.4839.

M. Varatharajulu, M. Duraiselvam, M. B. Kumar, and G. Jayaprakash, “Multi criteria decision making through TOPSIS and COPRAS on drilling parameters of magnesium AZ91,” J. Magnes. Alloy., vol. 10, no. 10, pp. 2857–2874, 2022, doi: 10.1016/j.jma.2021.05.006.

A. Fadilla, A. Hadi Nasyuha, and V. W. Sari, “Sistem Pendukung Keputusan Pemilihan Juru Masak (Koki) Menggunakan Metode Complex Proportional Assesment (COPRAS),” J. Ris. Komputer), vol. 9, no. 2, pp. 2407–389, 2022, doi: 10.30865/jurikom.v9i2.3920.

A. Triayudi, F. Nugroho, A. G. Simorangkir, and M. Mesran, “Sistem Pendukung Keputusan Dalam Penilaian Kinerja Supervisor Menggunakan Metode COPRAS Dengan Pembobotan ROC,” J. Comput. Syst. Informatics, vol. 3, no. 4, pp. 461–468, 2022, doi: 10.47065/josyc.v3i4.2214.

P. Rani, “Hesitant fuzzy SWARA-complex proportional assessment approach for sustainable supplier selection (HF-SWARA-COPRAS),” Symmetry (Basel)., vol. 12, no. 7, 2020, doi: 10.3390/sym12071152.

Ö. Deretarla, “An integrated Analytic Hierarchy Process and Complex Proportional Assessment for vendor selection in supply chain management,” Decis. Anal. J., vol. 6, 2023, doi: 10.1016/j.dajour.2022.100155.

A. Fathurrozi, A. Damuri, and Y. Prastowo, Agung Tri Rahmanto, “Sistem Pendukung Keputusan Pemilihan Lahan Tanaman Kopi Menggunakan Metode Complex Proportional Assessment (COPRAS),” KLIK Kaji. Ilm. Inform. dan Komput., vol. 3, no. 3, pp. 228–237, 2022.

M. Waruwu, “Pendekatan Penelitian Pendidikan: Metode Penelitian Kualitatif, Metode Penelitian Kuantitatif dan Metode Penelitian Kombinasi (Mixed Method),” J. Pendidik. Tambusai , vol. 7, no. 1, pp. 2896–2910, 2023.

S. Suendri, T. Triase, and S. Afzalena, “Implementasi Metode Job Order Costing Pada Sistem Informasi Produksi Berbasis Web,” Js (Jurnal Sekolah), vol. 4, no. 2, p. 97, 2021, doi: 10.24114/js.v4i2.17954.

R. Chaurasiya, “Pythagorean fuzzy entropy measure-based complex proportional assessment technique for solving multi-criteria healthcare waste treatment problem,” Granul. Comput., vol. 7, no. 4, pp. 917–930, 2022, doi: 10.1007/s41066-021-00304-z.

A. R. Mishra, “Fermatean fuzzy copula aggregation operators and similarity measures-based complex proportional assessment approach for renewable energy source selection,” Complex Intell. Syst., vol. 8, no. 6, pp. 5223–5248, 2022, doi: 10.1007/s40747-022-00743-4.

A. R. Mishra, “Healthcare evaluation in hazardous waste recycling using novel interval-valued intuitionistic fuzzy information based on complex proportional assessment method,” Comput. Ind. Eng., vol. 139, 2020, doi: 10.1016/j.cie.2019.106140.

S. M. Shaaban, “Groundwater Assessment Using Feature Extraction Algorithm Combined with Complex Proportional Assessment Method and Standard Deviation,” Int. J. Intell. Eng. Syst., vol. 14, no. 2, pp. 306–313, 2021, doi: 10.22266/ijies2021.0430.27.

M. F. Ridhwan, I. L. Sardi, and S. Y. Puspitasari, “Rekomendasi Pemilihan Tempat Usaha Makanan dengan Metode COPRAS di Kecamatan Jambangan,” e-Proceeding Eng., vol. 6, no. 2, pp. 9491–9503, 2019.

R. Destriana et al., Diagram UML Dalam Membuat Aplikasi Android Firebase" Studi Kasus Aplikasi Bank Sampah". Deepublish, 2021.

T. Arianti, A. Fa’izi, S. Adam, and Mira Wulandari, “Perancangan Sistem Informasi Perpustakaan Menggunakan Diagram Uml (Unified Modelling Language),” J. Ilm. Komput. …, vol. 1, no. 1, pp. 19–25, 2022.

R. D. Irawan, “A INFORMASI PENENTUAN TEMPAT MAGANG SISWA SMK DENGAN METODE SIMPLE ADDITIVE WEIGHTING (SAW),” J. Nas. Teknol. Komput., vol. 3, no. 3, pp. 164–179, 2023.




DOI: https://doi.org/10.33387/jiko.v7i2.8393

Refbacks

  • There are currently no refbacks.
slot gacor slot gacor hari ini slot gacor 2025 demo slot pg slot gacor slot gacor