Analisis Risiko K3 Proyek Gedung Laboratorium Universitas Khairun Menggunakan HIRARC
DOI:
https://doi.org/10.33387/josae.v9i1.11577Keywords:
HIRARC, risk management, construction project, occupational safety, laboratory buildingAbstract
Construction projects have a high level of risk, especially in occupational health and safety aspects. The laboratory building construction project at Khairun University (Unkhair) is a strategic infrastructure development that requires systematic risk management to minimize potential accidents and project losses. This study aims to identify potential hazards, assess risk levels, and determine the highest risk activities in the Unkhair laboratory building project using the HIRARC (Hazard Identification, Risk Assessment, and Risk Control) method. This research employed a quantitative descriptive approach. Primary data were collected through observation, interviews, and questionnaires involving 30 respondents from contractors and subcontractors. Risk assessment was conducted by analyzing likelihood and severity using a risk matrix based on HIRARC standards. The results identified 25 potential hazards categorized into 7 moderate risks, 16 high risks, and 2 extreme risks. Extreme risk levels were found mainly in electrical installation works and lightweight steel installation at height. Recommended risk controls include engineering controls, administrative controls, implementation of standard operating procedures (SOP), certified training, and mandatory use of personal protective equipment (PPE). The study concludes that HIRARC is effective in identifying and prioritizing occupational safety risks in building construction projects and can serve as a practical reference for improving safety performance in similar projects
References
Cahyo, T. A. N., & Sutarto, A. (2022). Analisis Implementasi Manajemen Risiko Pada Pembangunan Museum Dan Galeri Seni SBY*ANI Dengan Hirarc (Hazard Identification, Risk Assessment, and Risk Control). Citizen : Jurnal Ilmiah Multidisiplin Indonesia, 2(1), 71–80. https://doi.org/10.53866/jimi.v2i1.28
Wiryajati, I.K., Adnyani, I. A. S. (2017). Metode Hazard Identification Risk Assessment and Risk Control K3. Jurnal INTECH Teknik Industri Universitas Serang Raya, 3(1), 162.
Giovanni, A., Fathimahhayati, L. D., & Pawitra, T. A. (2023). Risk Analysis of Occupational Health and Safety Using Hazard Identification, Risk Assessment and Risk Control (HIRARC) Method (Case Study in PT Barokah Galangan Perkasa). IJIEM - Indonesian Journal of Industrial Engineering and Management, 4(2), 198. https://doi.org/10.22441/ijiem.v4i2.20398
Ihsan, T, Edwin, T, Irawan, R. O. (2016). Analisis Risiko K3 Dengan Metode HIRARC pada Area Produksi PT Cahaya Murni Andalas Permai. Jurnal Kesehatan Masyarakat Andalas
Rani, Hafnidar A. 2016. Manajemen Proyek Konstruksi. Yogyakarta : CV. Budi Utama
Santoso, D. O., Kurniawan, M. D., & Hidayat, H. (2022). Analisa Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC di PT. INHUTANI 1 UMI GRESIK. Jurnal Media Teknik Dan Sistem Industri, 6(1), 12. https://doi.org/10.35194/jmtsi.v6i1.1580
Simajuntak, J. P. (1994). Manajemen Keselamatan Kerja. Jakarta, HIPSMI.
I Supriyadi, DKK (2017). Identifikasi Bahaya dan Penilaian Risiko pada Divisi Boiler Menggunakan Metode Hazard Identification Risk Assessment And Risk Control (HIRARC). Journal of Industrial Hygiene and Occupational Health.
Ladimu, W. H., Ahadian, E. R., Taufiq, M., Saputra, Y., Nagu, N., & Tuhuteru, E. (2022). Analisis Pengaruh Penerapan Keselamatan Dan Kesehatan Kerja (K3) Terhadap Kinerja Pekerja Pada Proyek Konstruksi Pembangunan Gedung Di Kota Ternate. Clapeyron : Jurnal Ilmiah Teknik Sipil, 3(1), 8–15. https://doi.org/10.33387/clapeyron.v3i1.4591
Samudra, A. R., Utomo Dwi Hatmoko, J., & Wibowo, M. A. (2023). Analisa Faktor Risiko Prioritas Pada Proyek Konstruksi Jembatan. Syntax Literate: Jurnal Ilmiah Indonesia, 8(7).
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- The copyright of the accepted for publication articles shall be assigned to Journal Of Science and Engineering (JOSAE) as the publisher of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
- Journal Of Science and Engineering (JOSAE) maintain the publishing rights of the published articles.
- Authors are permitted to republish or disseminate published articles by sharing the link/DOI of the article at Journal Of Science and Engineering (JOSAE) . Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from Journal Of Science and Enggineering (JOSAE) with an acknowledgment of initial publication to this journal.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Â