Analisis Bad Measurement RTU Dengan Menggunakan State Estimasi

Muh Rais

Abstract


Penelitian ini bertujuan menganalisis hasil pengukuran Remote Terminal Unit (RTU), dan Mendeteksi bad measurement pada bus. Penelitian ini dilaksanakan di PT. PLN (Persero) Wilayah SULSEL pada Area Pengatur danPembagi Beban (AP2B). Data yang digunakan sebagai bahan analisis adalah data impedansi saluran, dan data hasil pengukuran RTU yang terdiri dari data bus, tegangan,  injeksi MVAR dan data beban system Kelistrikan SULSELTRABAR. Berdasarkan hasil analisis state estimasi, terjadi bad measurement yang terjadi pada bus akan menyebabkan berkurangnya tingkat keandalan sistem. Kesalahan ukur atau bad measurement dapat disebabkan oleh putusnya komunikasi dari GI ke control center atau tidak terkalibrasinya alat ukur yang ada di gardu induk. Sehingga terjadi kesalahan informasi pada control center


Keywords


bad measurement, Remote Terminal Unit, State Estimasi

References


Bonar Pandjaitan, 1999. Teknologi Sistem Pengendalian Tenaga Listrik Berbasis SCADA, Prenhallindo, Jakarta.

Arief Basuki, Timbar Imam Priadi, Anita Puspita Sari, 2010. SCADA GATEWAY, Solusi Cerdas untuk PEngembangan Substation Automation: PT. PLN (Persero) Wilayah SULSEL, SULTRA, dan SULBAR, AP2B Sistem SULSEL, Makassar

Wood, Allen J., B. F. Wollenberg, 1996. Power Generation, Operation, and Control. New York: John Wiley & Sons, Inc

Ali Abur, Antonio Gomez Exposito, Power System State Estimation: Theory and Implementation (Power Engineering, 24), Marcel Decker, New York,

James R Schott, 1997. Matrix Analysis for Statistics, New York: John Wiley & Sons, Inc

Cobus Strauss, 2003. Practical Electrical Network Automation and Communication Systems, Newnes Elsevier; Oxford.

Jim Iverson, 2007. Digital control technology enhances power system reliability and performance www.cumminspower.com. Diakses tanggal 28 Januari 2010

J.B.A London Jr, George L. R de Brito and N.G Bretas, 2003. Method for Meter and RTU Placement for State Estimation Purposes. Proceedings of the IEEE Bologna Power Tech Conference: Bologna, Italia

Marek Zima, Operation, monitoring and control Technology of Power System, www.eeh.ee.ethz.ch/uploads/tx_ethstudies. Diakses tanggal 28 Januari 2010

R. Neela, R. Ashokkumar, 2010. A Robust Decoupled WLAV State Estimation For Power Systems: International Journal of Engineering Science and Technology.

Rakesh Babba, 2010. Detecting False Data Injection Attacks Against DC State Estimation: University of Illinois Urbania

Reynaldo Fransisco Nuqui, 2001. State Estimation and Voltage Security Monitoring Using Synchronized Phasor Measurements: Blacksburg, Virginia.

Stuart A Boyer, 2004. SCADA: Supervisory Control and Data Acquisition. Edisi 3, ISA- The Instrumentation, Systems and Automation Society ; University of Virginia

Trosten Cegrell,1986. Power System Control Technology, Prentice/Hall Company.

T. Kerdchuen, W. Ongsakul, 2006. Measurement and RTU Placement for State Estimation by Loop Decompotition: Issue and Prospects for GMS




DOI: https://doi.org/10.33387/protk.v7i1.1746

Refbacks

  • There are currently no refbacks.






Editorial Office :
Protek : Jurnal Ilmiah Teknik Elektro
Department of Electrical Engineering. Faculty of Engineering. Universitas Khairun.
Address: Jusuf Abdulrahman 53 Gambesi, Ternate City, Indonesia.
Email: protek@unkhair.ac.id, WhatsApp: +6282292852552
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

View Stat Protek