Oil Filter Machine for Deep Frying with Smartphone Control and Monitoring using Client-Server Communication Protocol

Aditya Ramadhan, Ali Nurdin, Suroso Suroso

Abstract


The prevalence of fried snack consumption in our surroundings has become a widespread phenomenon. These fried snacks, commonly relished by many, are frequently served as side dishes with our main meals and are also a popular choice for satisfying quick hunger cravings. By utilizing the client-server communication method, this device can be assisted in its operation. The device employs ESP8266 as both the transmitter and receiver, while a smartphone serves as the control and monitoring tool. The primary purpose of this setup is to enhance the efficiency of oil-based food consumption, promoting healthier habits. The data collected from the device is split into two categories. Firstly, the communication data consists of the average RSSI (-52dBm) measured at a distance of 1 meter, with RSSI values increasing and becoming more susceptible as the distance grows. Secondly, the machine was tested for oil drainage in food, resulting in a weight decrease of 2.6% after 60 seconds of device usage, and the percentage of weight reduction increased with the given time.

Keywords


ESP8266, Client Server, Oil , RSSI, Fried Snack, Machine

Full Text:

PDF

References


W. B. Komalasari, “Statistik Konsumsi Pangan Tahun 2018,” Desember 2018.[Online]. Available: http://epublikasi.setjen.pertanian.go.id/downloa d/file/450-statistik-konsumsi-pangan-tahun- 2018.

E. N. Prastyanto, “Perencanaan Mesin Peniris Kacang Telur Sistem Tabung Putar dengan Kapasitas 5 kg,” Skripsi.Program Studi Teknik Mesin, Kediri, 2018.

S. Wasisto, I. L. I. Purnama dan P. W. Anggoro, “Perancangan Mesin Peniris untuk Aneka Makanan Ringan Hasil Gorengan,” dalam Seminar Nasional Multi Disiplin Ilmu Unisbank 2016, Semarang, 2016.

S. Huda, “Perancangan Mesin Peniris Minyak untuk Kerupuk,” Tugas Akhir.Program Studi Teknik Industri, Malang, 2019.

H. Istiqlaliyah, “Perencanaan Mesin Peniris Minyak pada Keripik Nangka dengan Kapasitas 2,5 kg/menit,” Nusantara of Engineering, vol. 2, no. 1, 2015.

B. S. Romadloni, “Perancangan Mesin Peniris Minyak pada Kacang Telur,” Proyek Akhir.Program Studi Teknik Mesin, Yogyakarta, 2012.

S. Adrianto et al., “I N F O R M A T I K A ALAT PENIRIS MINYAK OTOMATIS MANGGUNAKAN MIKROKOTROLER,” Jurnal Informatika, Manajemen dan Komputer, vol. 11, no. 2, 2019.

R. Ika Putri et al., “Pemanfaatan Mesin Peniris Minyak Untuk Meningkatkan Kualitas Keripik Kelompok Jaya Makmur,” 2022.

A. F. ALAN FADIANTO, “RANCANG BANGUN MESIN PEMOTONG RUMPUT ELEKTRIK.” UNIVERSITAS ISLAM MAJAPAHIT MOJOKERTO, 2019

Alamsyah, Ardi, A., & Faisal, M. N. (2015). Perancangan dan Penerapan Sistem Kontrol Peralatan Elektronik Jarak Jauh Berbasis Web. Jurnal Mekanikal, 6(2), 577-584.

S. Anwar, T. Artono, and J. Teknik Elektro Politeknik Negeri Padang, “Pengukuran Energi Listrik Berbasis PZEM-004T,” Proceeding Seminar Nasional Politeknik Negeri Lhokseumawe, vol. 3, no. 1, 2019.

S. Arafat, M. Kom, and Kom, “SISTEM PENGAMANAN PINTU RUMAH BERBASIS Internet Of Things (IoT) Dengan ESP8266,” Oktober-Desember, 2016.

S. Edriati et al., “Penggunaan Mit App Inventor untuk Merancang Aplikasi Pembelajaran Berbasis Android,” Jurnal Pengabdian kepada Masyarakat, vol. 12, no. 4, pp. 652–657, [Online]. Available: http://journal.upgris.ac.id/index.php/e-dimas

C.H. NeerajaSoni, C.H.Sarita, S. Maheshwari, B. Sahu, B. Jain, G. Shrivastava, ”Distance Measurement using Ultrasonic Sensor and Arduino”, International Journal of Engineering Science and Computing, vol. 7, no. 3, pp. 5991-5992, 2017.

A. Soni, A. Aman, ”Distance Measurement of an Object by us- ing Ultrasonic Sensors with Arduino and GSM Module”, Inter- national Journal of Science Technology & Engineering, vol.4, no. 11, pp.23-28, 2018.




DOI: https://doi.org/10.33387/protk.v11i1.6432

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.



Editorial Office :
Protek : Jurnal Ilmiah Teknik Elektro
Department of Electrical Engineering. Faculty of Engineering. Universitas Khairun.
Address: Jusuf Abdulrahman 53 Gambesi, Ternate City, Indonesia.
Email: protek@unkhair.ac.id, WhatsApp: +6282292852552
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

View Stat Protek