Implementation of an IoT-Based Control and Monitoring System for Neon Box Conditions in the Electrical Engineering Building
DOI:
https://doi.org/10.33387/protk.v13i2.11082Keywords:
Control, Monitoring, Maintenance, SensorAbstract
The implementation of an Internet of Things (IoT)-based control and monitoring system for the neon box at the Electrical Engineering Department Building aims to improve operational efficiency, installation safety, and the effectiveness of outdoor lighting maintenance. As an information medium and building identity, the neon box requires real-time monitoring of power, voltage, current, light intensity, and operational status. In this study, a system was designed and implemented using a NodeMCU ESP8266 microcontroller as the main controller, a PZEM-004T sensor to measure voltage, current, and power, a TSL2561 lux sensor to read the light intensity produced by the neon box, and a relay module as an actuator to control the neon box lamp. The Blynk IoT platform is used as the interface to display monitoring data and control the neon box remotely. The system is capable of sending data periodically to the server and displaying information such as voltage, current, power, energy, and illumination levels through a digital dashboard, allowing users to monitor the neon box condition at any time via a smartphone. In addition to monitoring functions, the relay module integrated with the IoT system enables operators to remotely turn the neon box on or off through the Blynk IoT application. The Blynk IoT interface successfully displays four main parameters: voltage, electrical power, lumen, and neon box status at the Electrical Engineering Building. The PZEM-004T sensor achieved an average reading error of 0.66% for voltage and 2.53% for current, while the TSL2561 sensor had an average error of 1.42%. The system can detect lamp failure through combined voltage and power readings, with a response time of 0.856 seconds on the Blynk IoT application, which is influenced by internet network quality.
Downloads
References
N. D. K, J. K. Gowda, H. S, H. S. T, and J. John, “Wi-fi Controlled Smart Home Automation,” in 2022 IEEE International Conference on Data Science and Information System (ICDSIS), 2022, pp. 1–5. doi: 10.1109/ICDSIS55133.2022.9915976.
O. Ayan and B. Turkay, “IoT-Based Energy Efficiency in Smart Homes by Smart Lighting Solutions,” in 2020 21st International Symposium on Electrical Apparatus & Technologies (SIELA), 2020, pp. 1–5. doi: 10.1109/SIELA49118.2020.9167065.
P. P. Ray, “A survey on Internet of Things architectures,” J. King Saud Univ. - Comput. Inf. Sci., vol. 30, no. 3, pp. 291–319, 2018, doi: https://doi.org/10.1016/j.jksuci.2016.10.003.
V. Sámano-Ortega, H. Méndez-Guzmán, J. Martínez-Nolasco, J. Padilla-Medina, M. Santoyo-Mora, and J. Zavala-Villalpando, “Electrical Energy Consumption Monitoring System in the Residential Sector using IoT,” IEEE Lat. Am. Trans., vol. 21, no. 1, pp. 158–166, 2023.
N. Wibowo, D. Mursyitah, H. Zarory, and A. Ullah, “Fire Detection Design Based on Gas Leakage Accompanied by Fire Location Point Using ESP32 Based on IoT,” PROtek J. Ilm. Tek. Elektro, vol. 12, no. 1, pp. 60–66, 2025.
A. Mosenia and N. K. Jha, “A Comprehensive Study of Security of Internet-of-Things,” IEEE Trans. Emerg. Top. Comput., vol. 5, no. 4, pp. 586–602, 2017, doi: 10.1109/TETC.2016.2606384.
S. Godara and V. K. Srivastava, “An IoT-Based Smart Street Lighting System to Lower Energy Consumption,” J. Electr. Syst., vol. 19, no. 2, pp. 163–173, 2023.
Z. Chen, C. B. Sivaparthipan, and B. Muthu, “IoT based smart and intelligent smart city energy optimization,” Sustain. Energy Technol. Assessments, vol. 49, p. 101724, 2022, doi: https://doi.org/10.1016/j.seta.2021.101724.
Y. S. Parihar, “Internet of Things and Nodemcu,” J. Emerg. Technol. Innov. Res., vol. 6, no. 6, pp. 1085–1088, 2019.
U. Singh and M. A. Ansari, “Smart Home Automation System Using Internet of Things,” in 2019 2nd International Conference on Power Energy, Environment and Intelligent Control (PEEIC), 2019, pp. 144–149. doi: 10.1109/PEEIC47157.2019.8976842.
A. Akhriana, Husain, S. Aisa, S. R. Arifin, M. M. Nur, and H. Sulihin, “Parking Management System Prototype Using Multiplatform Based NodeMCU,” Protek J. Ilm. Tek. Elektro, vol. 11, no. 3, pp. 188–194, 2024.
S. V, S. V, S. S, V. N, A. M, and D. D, “Illuminating the Future: A Smart Street Light Controlling and Monitoring System Using Internet of Things Enabled Smart Sensors,” in 2024 Ninth International Conference on Science Technology Engineering and Mathematics (ICONSTEM), 2024, pp. 1–8. doi: 10.1109/ICONSTEM60960.2024.10568747.
U. Ali, M. U. Ramzan, W. Ali, M. E. Rana, and A. Qayyum, “IoT-Driven Smart Energy Monitoring: Real-time Insights and AI-Based Unit Predictions,” in 2023 IEEE 21st Student Conference on Research and Development (SCOReD), 2023, pp. 672–677. doi: 10.1109/SCOReD60679.2023.10563825.
H. Amri, W. M. Faizal, B. Hardi, A. W. Wahyudi, A. Ardi, and L. Garcia, “The Public Street Lighting System Using Solar Panels Based on Global Positioning System (GPS) and Internet of Things,” in 7th International Conference on Applied Science and Technology, 2025, pp. 1–9.
H. Amri, Stephan, Zulkifli, Hardi, I. Haris, and A. Zulaika, “Voltage and Current Monitoring System of Neon Box Lamps at the Electrical Engineering Building,” in International Conference on Industrial Technology and Business, 2025, pp. 186–192.
P. Sujidha, P. Radha, T. S. Priya, A. Usha, and M. S. Devi, “IOT Based Home Automation Using NodeMCU and Blynk Application,” Int. J. Mod. Trends Sci. Technol., vol. 7, no. 3, pp. 151–153, 2021.
V. Palaniappan, S. Poovalingam, P. V. Sampath, and K. Solaraj, “An Integrated IOT Enabled Smart Lighting Platform to Monitor and Control Distributed Devices,” in 2023 IEEE Bombay Section Signature Conference (IBSSC), 2023, pp. 1–6. doi: 10.1109/IBSSC58994.2023.10170947.
F. Chekired et al., “Design and Implementation of Control and Management System for Smart Street Lighting,” in 2024 IEEE Sustainable Smart Lighting World Conference & Expo (LS24), 2024, pp. 1–4. doi: 10.1109/LS2463127.2024.10881773.
F. T. Nigel and O. M. Longe, “Smart Energy Efficient Lighting System for Smart Buildings,” in 2021 IEEE PES/IAS PowerAfrica, IEEE, 2021, pp. 1–5.
A. Sumendap, A. Tembo, and F. Manoppo, “Perancangan Lampu Neon Box Menggunakan Arduino Pada Universitas Parna Raya,” J. Log., vol. 10, no. 1, pp. 25–30, 2022.
M. P. Rahmad, Turahyo, and N. Imansyah, “Rancang Bangun Kendali Lampu Dengan Menggunakan Ponsel Pintar Android Via Wifi Berbasis Mikrokontroler,” J. ELKHA, vol. 12, no. 1, pp. 41–46, 2020.
A. H. Safitra, “Protptipe Sistem Kontrol Lampu LED Melalui Jaringan Internet Berbasis Arduino,” J. List. Instrumentasi dan Elektron. Terap., vol. 2, no. 1, pp. 16–20, 2021.
A. Adam, M. Muharnis, A. Ariadi, and J. Lianda, “Penerapan IoT untuk Sistem Pemantauan Lampu Penerangan Jalan Umum,” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 5, no. 1, pp. 32–41, 2020, doi: 10.21831/elinvo.v5i1.31249.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Hikmatul Amri, Zulkifli Zulkifli, Stephan Stephan, Hardi B, Ilham Haris, Azzahra Zulaika, Riski Kurniansyah

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright & License
Copyright, licensing, and reuse terms for articles published in Protek: Jurnal Ilmiah Teknik Elektro
1. Copyright
Authors who publish in Protek: Jurnal Ilmiah Teknik Elektro retain the copyright of their work. Copyright of each article is vested exclusively in its authors.
2. License
Articles in Protek are published under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0). Anyone may share and adapt the work under the following terms:
3. Author's Warranties
By submitting a manuscript, the author warrants that the article:
- is original and has not been published before;
- contains no unlawful statements;
- does not infringe the rights of others;
- is subject to copyright vested exclusively in the author(s); and
- includes any necessary permissions to quote material from other sources.
4. User Rights
Under CC BY-NC-SA 4.0, users may copy, distribute, display, and perform the work for non-commercial purposes only. When distributing the work, users must give proper credit to the authors and to Protek as the original place of publication.
7. Royalties
The parties agree that no royalties or other fees are paid to the authors for publication. To the extent legally permissible, authors waive any claim to royalties for the publication of their article.
8. Miscellaneous
- Protek publishes the article in electronic form and makes it freely available to the public, without charge to readers.
- The editors may modify the article to conform to the journal's style, including punctuation, spelling, capitalization, referencing, and usage.
Questions about copyright or licensing can be sent to protek@unkhair.ac.id. See also the Open Access Policy and Publication Ethics.

