Comparison of Battery Electric Power Consumption in a Fingerprint System or a Motor Manual Lock System

Authors

  • Sitti Amalia Instittut Teknologi Padang
  • Rafika Andari Instittut Teknologi Padang
  • Jumadi Arif Instittut Teknologi Padang

DOI:

https://doi.org/10.33387/protk.v10i1.4285

Keywords:

Electric power, fingerprint sensor, motorcycle, motorcycle security system.

Abstract

Motorcycle security systems using fingerprint sensors are needed to avoid theft because of their high level of security compared to manual systems. This study underscores the importance of using this fingerprint sensor for motorcycle security. The formulation of the problem in this study is how much electricity is required in the motorcycle battery for this fingerprint security system. This system uses various components, such as the R503 fingerprint sensor, Arduino Uno, buzzer, 4-channel relay, ignition key, and motorcycle starter. Testing of this system is performed by inserting a finger in a wet, oily, dusty, or normal condition, and the result is that this sensor is capable of detecting the entire condition of the finger. Attempts to start a motorcycle with all ten fingers showed that the left index finger started faster under normal conditions, in 1.55 seconds compared to the manual method, which took 2.05 seconds longer. It also measures power consumption and calculates how long the battery can power this device. The result is that the battery can power this device for 180 hours without interruption

References

Y. Herwangi, I. Syabri, and I. Kustiwan, “Peran dan Pola Penggunaan Sepeda Motor Pada Masyarakat Berpendapatan Rendah di Kawasan Perkotaan Yogyakarta,†J. Perenc. Wil. dan Kota, vol. 26, no. 3, pp. 166–176, 2015, doi: 10.5614/jpwk.2015.26.3.2.

B. Danar and M. Zakarijah, “Sistem Keamanan Ganda Sepeda Motor dengan Fingerprint dan Gprs Berbasis Arduino untuk Peningkatan Keamanan,†Elinvo (Electronics, Informatics, Vocat. Educ., vol. 5, no. 1, pp. 1–10, 2020, doi: 10.21831/elinvo.v5i1.34592.

S. R. S. P. Pingat Rishabh Agrawal, Sarika Mhetre, Pranay Raushan, “Real time smart car security system by using biometric,†Int. J. Innov. Technol. Explor. Eng., vol. 2, no. 4, pp. 166–168, 2013.

S. A. A. K. Montaser N. Ramadan, Mohammad A. Al Khedher, “An efficient automotive security system is implemented for anti-theft using an embedded system occupied with a Global Positioning System (GPS) and a Global System,†Int. J. Mach. Learn. Comput., vol. 2, no. 1, pp. 88–92, 2012, [Online]. Available: http://ijmlc.org/papers/94-T043.pdf.

A. Bachri, “Rancang Bangun Sistem Keamanan Sepeda Motor Dengan Fingerprint Berbasis Telephone,†JE-Unisla, vol. 3, no. 2, p. 19, 2018.

H. Irkhamsyah, M. Lutfi, and B. Marruddani, “Pengaman Sepeda Motor Berbasis Radio Frequency Identification (RFID) dan Global Positioning System (GPS),†J. Otomasi, Kendali, dan Apl. Ind., vol. 1, no. 1, p. http://journal.unj.ac.id/unj/index.php/autocracy/a, 2014.

P. B. Basuki, U. Sunarya, and A. Novianti, “Perancangan Sistem Keamanan Sepeda Di Tempat Umum Berbasis Rfid,†J. Elektro dan Telekomun. Terap., vol. 4, no. 1, p. 457, 2017, doi: 10.25124/jett.v4i1.991.

T. Juwariyah and A. C. Dewi, “Rancang Bangun Sistem Pengaman Sepeda Motor Dengan Sensor Sidik Jari,†ejournal Univ. Pembang. Nas. “Veteran†Jakarta, vol. 13, no. 2, pp. 223–227, 2017.

Raju Rizkyana and Awang Surya, “Sistem Keamanan Sepeda Motor Dengan Mengganti Saklar Starter Menggunakan Fingerprint,†JTTM J. Terap. Tek. Mesin, vol. 2, no. 1, pp. 43–51, 2021, doi: 10.37373/jttm.v2i1.90.

B. Suharjo, S. Falentino, and S. Liawatimena, “Perancangan Sistem Keamanan Sepeda Motor Dengan Sistem Sidik Jari,†J. Tek. Komput., vol. 19, no. 1, pp. 17–27, 2016.

D. I. Prasetya and M. Mushlihudin, “Sistem Keamanan Sepeda Motor Menggunakan Kata Sandi Berbasis Arduino Nano,†J. Ilm. Tek. Elektro Komput. dan Inform., vol. 4, no. 1, p. 11, 2018, doi: 10.26555/jiteki.v4i1.8985.

Suprianto, “Sepeda Motor Dengan Pelacakan Lokasi Secara Live Tracking Gps Terintegrasi,†Skripsi Jurusan Teknik Elektro Universitas Negeri Semarang, 2019.

I. G. A. M. Y. Mahaputra, I. G. A. P. R. Agung, and L. Jasa, “Rancang Bangun Sistem Keamanan Sepeda Motor dengan GPS Tracker Berbasis Mikrokontroler dan Aplikasi Andrloid,†Maj. Ilm. Teknol. Elektro, vol. 18, no. 3, 2019.

T. Juwariyah, D. Widiyanto, and S. Sulasmingsih, “Purwa Rupa Sistem Pengaman Sepeda Motor Berbasis IoT (Internet of Things,†J. Otomasi Kontrol dan Instrumentasi, vol. 11, no. 1, p. 49, 2019, doi: 10.5614/joki.2019.11.1.5.

A. P. Manullang, Y. Saragih, and R. Hidayat, “Implementasi Nodemcu Esp8266 Dalam Rancang Bangun Sistem Keamanan Sepeda Motor Berbasis Iot,†JIRE (Jurnal Inform. Rekayasa Elektron. , vol. 4, no. 2, pp. 163–170, 2021, [Online]. Available: http://e-journal.stmiklombok.ac.id/index.php/jireISSN.2620-6900.

A. Tri Wibowo, I. Salamah, and A. Taqwa, “Rancang Bangun Sistem Keamanan Sepeda Motor Berbasis Iot (Internet of Things),†J. Fasilkom, vol. 10, no. 2, pp. 103–112, 2020, doi: 10.37859/jf.v10i2.2083.

J. R. Oroh, E. Kendekallo, S. R. U. A. Sompie, and J. O. Wuwung, “Rancang Bangun Sistem Keamanan Motor Dengan Pengenalan Sidik Jari,†J. Tek. Elektro dan Komput., vol. 3, no. 1, pp. 36–42, 2014, doi: 10.35793/jtek.3.1.2014.3773.

Masnur, S. Alam, and M. F. Nasir, “Rancang Bangun Sistem Keamanan Motor Dengan Pengenalan Sidik Jari,†J. Tek. Elektro dan Komput., vol. 3, no. 1, pp. 36–42, 2014, doi: 10.35793/jtek.3.1.2014.3773.

G. Turesna and W. P. Sari, “Proteksi Sistem Keamanan Kendaraan Mobil Menggunakan RFID Berbasis MCU ATMEGA 328,†J. TIARSIE, vol. 16, no. 2, p. 65, 2019, doi: 10.32816/tiarsie.v16i2.59.

T. U. Anastasia, A. Mufti, and A. Rahman, “Rancang Bangun Sistem Parkir Otomatis Dan Informatif Berbasis Mikrokontroler Atmega2560,†Kitektro, vol. 2, no. 1, pp. 29–34, 2017.

I. Sumadikarta and E. P. Setiyawan, “Perancangan Sistem Pembaca Kartu Mahasiswa Berbasis Radio Frequency Identification,†Pros. Semin. Nas. Inov. Teknol. SNITek 2017

Downloads

Additional Files

Published

2023-01-07

How to Cite

Amalia, S., Andari, R., & Arif, J. (2023). Comparison of Battery Electric Power Consumption in a Fingerprint System or a Motor Manual Lock System. Protek : Jurnal Ilmiah Teknik Elektro, 10(1), 1–7. https://doi.org/10.33387/protk.v10i1.4285

Issue

Vol. 10 No. 1 (2023): Protek : Jurnal Ilmiah Teknik Elektro

Section

Electrical, Power and Energy

License

Authors who publish with this journal agree to the following terms:

  1. The copyright of the accepted for publication articles shall be assigned to Protek : Jurnal Ilmiah Teknik Elektro as the publisher of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
  2. Protek : Jurnal Ilmiah Teknik Elektro maintain the publishing rights of the published articles.
  3. Authors are permitted to republish or disseminate published articles by sharing the link/DOI of the article at Protek : Jurnal Ilmiah Teknik Elektro. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from Protek : Jurnal Ilmiah Teknik Elektro with an acknowledgment of initial publication to this journal.

Protek : Jurnal Ilmiah Teknik Elektro by Department of Electrical Engineering, Faculty of Engineering, Universitas Khairun

Creative Commons LicenseThis work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.