IoT-Based Smart Dustbin Prototype
DOI:
https://doi.org/10.33387/protk.v10i2.6035Keywords:
smart dustbin, IoT, ultrasonic, loadcell, GPSAbstract
Increasing population and consumption patterns affect the volume, type, and characteristics of waste which vary and increase periodically. This increment must be accompanied by the management of waste transportation so that the accumulation of waste can be prevented. Therefore, it is necessary to design a prototype of a smart dustbin condition monitoring tool that is capable of providing full information and notifying the collector in the form of the location of the IoT-based dustbin. The research method is a prototyping type to obtain a smart dustbin prototype and produces IoT-based smart dustbin hardware and software. Ultrasonic sensors are used to detect objects and measure the height of waste, loadcell sensor measure the weight of waste, and GPS is used to obtain the location of dustbin. NodeMCU ESP8266 processes sensor data and sends it to the user. The results showed that testing of the object detection hardware was able to open and close the dustbin automatically when there was an object at a distance of ≤50 cm. Detectors of height and weight of waste can measure the height and weight of waste with an error of 0.4% and 0.15% respectively. The results of software testing show that the tool succeeds in sending WhatsApp notification data when the waste height reaches 3 cm from the sensor or 4000-gram waste weight, with a Throughput measurement of 327.95 kbps, and takes 2.61 seconds to send a notification message of 69 bytes.Downloads
References
S. Syahrir, M. Saad, A. Asriani, and , Erika Rachma Aprilia, “TeMP (Tempat Sampah Pintar):Alat Monitoring dan Pendeteksi Kelembaban Sampah Berbasis Mikrokontroller,†J. Teknol. Elekterika, vol. 3, no. 1, p. 39, 2019, doi: 10.31963/elekterika.v3i1.2013.
N. Nasron, S. Suroso, and C. Buana, “Rancang Bangun Pengaman Rumah dan Kontrol Pada Kunci Pintu dengan Metode Kriptogafi Hill Cipher Berbasis IoT,†PRotek J. Ilm. Tek. Elektro, vol. 7, no. 2, pp. 104–109, 2020, doi: 10.33387/protk.v7i2.2073.
A. M. Saad, M. A. Masa, T. S. D. Abdurrahman, and A. Syarifuddin, “Design of IoT-Based Analog kWh Meter Monitoring,†PROtek J. Ilm. Tek. Elektro, vol. 10, no. 1, p. 52, 2023, doi: 10.33387/protk.v10i1.5571.
E. Sorongan, R. Kango, and S. Suhaedi, “The Application of Energy Management Systems Using the Internet of Things to Improve the Efficiency of Electrical Energy Usage in the MSMEs Sector,†PROtek J. Ilm. Tek. Elektro, vol. 10, no. 1, p. 26, 2023, doi: 10.33387/protk.v10i1.5042.
Suryaman, “Prototype Sistem Monitoring Ketinggian dan Berat Sampah Berbasis IoT Menggunakan Modul Wemos D1 Mini,†Jakarta, 2022.
D. Ariyanti, A. A. Rahma, and S. N. Shabrina, “SISTEM MONITORING KESEHATAN LINGKUNGAN BERBASIS IoT (INTERNET of THINGS),†Repository.Unib.Ac.Id, 2022, [Online]. Available: http://repository.unib.ac.id/17892/
M. D. Aprillah, N. Nasron, and M. Mujur Rose, “Perancangan Tracking Device Dan Kendali Pada Kendaraan Bermotor Menggunakan GPS Terintegrasi Internet Of Things,†PROtek J. Ilm. Tek. Elektro, vol. 8, no. 1, pp. 26–30, 2021, doi: 10.33387/protk.v8i1.2236.
L. R. R. Ronaldo, A. Darwanto, and N. E. Khomariah, “Purwarupa Pendeteksi Dini Kebakaran Menggunakan Fuzzy Logic dengan SMS Sebagai Media Informasi,†KONVERGENSI, vol. 14, no. 2, pp. 430–439, 2018.
C. Dahlman, F. Sarwar, R. Bååth, L. Wahlberg, and S. Sikström, “Prototype Effect and the Persuasiveness of Generalizations,†Rev. Philos. Psychol., vol. 7, no. 1, pp. 163–180, 2016, doi: 10.1007/s13164-015-0264-1.
M. P. Kurniawan and A. Santosa, “Perancangan furnitur berbahan olahan rotan berbasis smart living untuk apartemen SOHO,†Universitas Kristen Petra, 2016. [Online]. Available: http://publication.petra.ac.id/index.php/desain-interior/article/view/4618/4233
Z. Wu, K. Qiu, and J. Zhang, “A smart microcontroller architecture for the internet of things,†Sensors (Switzerland), vol. 20, no. 7, pp. 1–17, 2020, doi: 10.3390/s20071821.
M. Pandey, A. Gowala, M. Goswami, and C. Saikia, “Smart Dustbin Using Arduino,†Int. J. Sci. Res. Eng. Manag., vol. 4, no. 8, 2020, [Online]. Available: https://www.researchgate.net/publication/343530056
Hardana and R. F. Isputra, Membuat Aplikasi IoT: Internet of Things. Yogyakarta: CV. Lokomedia, 2019.
J. T. Kelly, K. L. Campbell, E. Gong, and P. Scuffham, “The Internet of Things: Impact and Implications for Health Care Delivery,†J. Med. Internet Res., vol. 22, no. 11, 2020, doi: 10.2196/20135.
A. Susanto and Meiryani, “System Development Method with The Prototype Method,†Int. J. Sci. Technol. Res., vol. 8, no. 7, pp. 141–144, 2019.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- The copyright of the accepted for publication articles shall be assigned to Protek : Jurnal Ilmiah Teknik Elektro as the publisher of the journal. The intended copyright includes the rights to publish articles in various forms (including reprints).
- Protek : Jurnal Ilmiah Teknik Elektro maintain the publishing rights of the published articles.
- Authors are permitted to republish or disseminate published articles by sharing the link/DOI of the article at Protek : Jurnal Ilmiah Teknik Elektro. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from Protek : Jurnal Ilmiah Teknik Elektro with an acknowledgment of initial publication to this journal.
Protek : Jurnal Ilmiah Teknik Elektro by Department of Electrical Engineering, Faculty of Engineering, Universitas Khairun
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
