IoT-Based Smart Dustbin Prototype
DOI:
https://doi.org/10.33387/protk.v10i2.6035Kata Kunci:
smart dustbin, IoT, ultrasonic, loadcell, GPSAbstrak
Increasing population and consumption patterns affect the volume, type, and characteristics of waste which vary and increase periodically. This increment must be accompanied by the management of waste transportation so that the accumulation of waste can be prevented. Therefore, it is necessary to design a prototype of a smart dustbin condition monitoring tool that is capable of providing full information and notifying the collector in the form of the location of the IoT-based dustbin. The research method is a prototyping type to obtain a smart dustbin prototype and produces IoT-based smart dustbin hardware and software. Ultrasonic sensors are used to detect objects and measure the height of waste, loadcell sensor measure the weight of waste, and GPS is used to obtain the location of dustbin. NodeMCU ESP8266 processes sensor data and sends it to the user. The results showed that testing of the object detection hardware was able to open and close the dustbin automatically when there was an object at a distance of ≤50 cm. Detectors of height and weight of waste can measure the height and weight of waste with an error of 0.4% and 0.15% respectively. The results of software testing show that the tool succeeds in sending WhatsApp notification data when the waste height reaches 3 cm from the sensor or 4000-gram waste weight, with a Throughput measurement of 327.95 kbps, and takes 2.61 seconds to send a notification message of 69 bytes.Unduhan
Referensi
S. Syahrir, M. Saad, A. Asriani, and , Erika Rachma Aprilia, “TeMP (Tempat Sampah Pintar):Alat Monitoring dan Pendeteksi Kelembaban Sampah Berbasis Mikrokontroller,†J. Teknol. Elekterika, vol. 3, no. 1, p. 39, 2019, doi: 10.31963/elekterika.v3i1.2013.
N. Nasron, S. Suroso, and C. Buana, “Rancang Bangun Pengaman Rumah dan Kontrol Pada Kunci Pintu dengan Metode Kriptogafi Hill Cipher Berbasis IoT,†PRotek J. Ilm. Tek. Elektro, vol. 7, no. 2, pp. 104–109, 2020, doi: 10.33387/protk.v7i2.2073.
A. M. Saad, M. A. Masa, T. S. D. Abdurrahman, and A. Syarifuddin, “Design of IoT-Based Analog kWh Meter Monitoring,†PROtek J. Ilm. Tek. Elektro, vol. 10, no. 1, p. 52, 2023, doi: 10.33387/protk.v10i1.5571.
E. Sorongan, R. Kango, and S. Suhaedi, “The Application of Energy Management Systems Using the Internet of Things to Improve the Efficiency of Electrical Energy Usage in the MSMEs Sector,†PROtek J. Ilm. Tek. Elektro, vol. 10, no. 1, p. 26, 2023, doi: 10.33387/protk.v10i1.5042.
Suryaman, “Prototype Sistem Monitoring Ketinggian dan Berat Sampah Berbasis IoT Menggunakan Modul Wemos D1 Mini,†Jakarta, 2022.
D. Ariyanti, A. A. Rahma, and S. N. Shabrina, “SISTEM MONITORING KESEHATAN LINGKUNGAN BERBASIS IoT (INTERNET of THINGS),†Repository.Unib.Ac.Id, 2022, [Online]. Available: http://repository.unib.ac.id/17892/
M. D. Aprillah, N. Nasron, and M. Mujur Rose, “Perancangan Tracking Device Dan Kendali Pada Kendaraan Bermotor Menggunakan GPS Terintegrasi Internet Of Things,†PROtek J. Ilm. Tek. Elektro, vol. 8, no. 1, pp. 26–30, 2021, doi: 10.33387/protk.v8i1.2236.
L. R. R. Ronaldo, A. Darwanto, and N. E. Khomariah, “Purwarupa Pendeteksi Dini Kebakaran Menggunakan Fuzzy Logic dengan SMS Sebagai Media Informasi,†KONVERGENSI, vol. 14, no. 2, pp. 430–439, 2018.
C. Dahlman, F. Sarwar, R. Bååth, L. Wahlberg, and S. Sikström, “Prototype Effect and the Persuasiveness of Generalizations,†Rev. Philos. Psychol., vol. 7, no. 1, pp. 163–180, 2016, doi: 10.1007/s13164-015-0264-1.
M. P. Kurniawan and A. Santosa, “Perancangan furnitur berbahan olahan rotan berbasis smart living untuk apartemen SOHO,†Universitas Kristen Petra, 2016. [Online]. Available: http://publication.petra.ac.id/index.php/desain-interior/article/view/4618/4233
Z. Wu, K. Qiu, and J. Zhang, “A smart microcontroller architecture for the internet of things,†Sensors (Switzerland), vol. 20, no. 7, pp. 1–17, 2020, doi: 10.3390/s20071821.
M. Pandey, A. Gowala, M. Goswami, and C. Saikia, “Smart Dustbin Using Arduino,†Int. J. Sci. Res. Eng. Manag., vol. 4, no. 8, 2020, [Online]. Available: https://www.researchgate.net/publication/343530056
Hardana and R. F. Isputra, Membuat Aplikasi IoT: Internet of Things. Yogyakarta: CV. Lokomedia, 2019.
J. T. Kelly, K. L. Campbell, E. Gong, and P. Scuffham, “The Internet of Things: Impact and Implications for Health Care Delivery,†J. Med. Internet Res., vol. 22, no. 11, 2020, doi: 10.2196/20135.
A. Susanto and Meiryani, “System Development Method with The Prototype Method,†Int. J. Sci. Technol. Res., vol. 8, no. 7, pp. 141–144, 2019.
Unduhan
File Tambahan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
ÂÂ
- Penulis menyimpan hak cipta dan memberikan jurnal hak penerbitan pertama naskah secara simultan dengan lisensi di bawah Creative Commons Attribution License yang mengizinkan orang lain untuk berbagi pekerjaan dengan sebuah pernyataan kepenulisan pekerjaan dan penerbitan awal di jurnal ini.
- Penulis bisa memasukkan ke dalam penyusunan kontraktual tambahan terpisah untuk distribusi non ekslusif versi kaya terbitan jurnal (contoh: mempostingnya ke repositori institusional atau menerbitkannya dalam sebuah buku), dengan pengakuan penerbitan awalnya di jurnal ini.
- Penulis diizinkan dan didorong untuk mem-posting karya mereka online (contoh: di repositori institusional atau di website mereka) sebelum dan selama proses penyerahan, karena dapat mengarahkan ke pertukaran produktif, seperti halnya sitiran yang lebih awal dan lebih hebat dari karya yang diterbitkan. (Lihat Efek Akses Terbuka).
